lpac is a command line utility that can be used to manage eSIMs on a compatible device through a smart card reader. This page will summarize the main steps needed to use it with a JMP eSIM Adapter.

Getting Started

You'll need a smart card or SIM reader that is detected by your computer. Windows may require installation of a driver. While most such readers should work, users have reported that https://www.amazon.com/dp/B0CKQ8SSB4 in particular works well.

Linux

You can use pcsc_scan on Linux to view the reader and see if it registers the card when inserted. Some desktop Linux distributions such as Fedora Silverblue come with pcscd installed, otherwise you'll need to install that such as with apt on Debian and derivatives:

sudo apt install pcscd

Unless building with source, it's probably quickest to download and extract lpac-linux-x86_64.zip from https://github.com/estkme-group/lpac/releases. Assuming you extracted the zip to ~/Downloads/lpac, open a terminal and run:

cd ~/Downloads/lpac

Managing Profiles

You'll want to make sure you can see the eSIM adapter along with its test profile (do not delete the default profile):

./lpac profile list

Downloading an eSIM

From the LPA activation code you receive when purchasing an eSIM, such as LPA:1$example.tld$XX-YYYYYY-ZZZZZZZ:

./lpac profile download -s example.tld -m "XX-YYYYYY-ZZZZZZZ"

Enabling an eSIM profile

Only one profile can be enabled at a time. You can obtain the ICCID from the profile list command.

./lpac profile enable [ICCID]

Nicknaming an eSIM profile

./lpac profile nickname [ICCID] "My new eSIM"

Troubleshooting

If you get an error involving

• SCardEstablishContext()
• APDU driver init failed

Try installing a possible missing dependency ccid. Also enable the systemd `pcscd.socket` with a command like

systemctl enable --now pcscd.socket